Dual Electronics XDM17BT High Resolution LCD Single DIN Car Stereo Receiver with Built-In Bluetooth, USB, MP3 Player & Siri/Google Assist Button : User Manual (2024)

PAGE 1
XDM17BT INSTALLATION/OWNER'S MANUAL AM/FM Receiver with Bluetooth and Fixed Face
PAGE 2
XDM17BT INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
PAGE 3
XDM17BT INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio.
See Also
DUAL XDM27BT INSTALLATION & OWNER'S MANUAL Pdf Download DUAL XDM16BT INSTALLATION & OWNER'S MANUAL Pdf Download DUAL XDM17BT INSTALLATION & OWNER'S MANUAL Pdf Download
PAGE 4
XDM17BT OPERATION Control Locations 1 2 18 3 4 15 16 17 6 5 14 13 12 11 10 9 8 7 1 Power 7 Auxiliary Input 13 2 Mute 8 Reset 14 Preset 1 / Play/Pause 3 Voice Control 9 Preset 6 / Folder Up 15 Mode 4 Volume Knob 10 Preset 5 / Folder Down 16 Band/Display 5 Bluetooth Talk 11 Preset 4 / Random 17 Tune Up 6 USB Port 12 Preset 3 / Repeat 18 Tune Down 1 17 16 15 14 13 12 2 3 1 Mode 10 Preset 6 / Folder Up 4 2 Volume Up 11 Mute 3 Power 12 AS/PS 4 Audio
PAGE 5
XDM17BT OPERATION General Operation Power On/Off Changing Modes Volume Mute Auxiliary Inputs Reset Setting the Clock Press the button to turn the unit on. Press turn the unit off. again to Press MODE to select between Radio, USB, Auxiliary Input and Bluetooth. Modes of operation are shown in the display. Adjust volume using the volume knob (00-43). Press to silence the audio. Press again to resume listening at the previously selected volume. Insert a 3.5mm cable in the unit's front AUX port.
PAGE 6
XDM17BT OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE nn or TUNE ll to seek to the previous or next strong station. Manual Tuning nn ll Press and hold TUNE or TUNE to enter manual tuning mode, then press TUNE or TUNE momentarily to change radio frequency up or down one step at a time. Press and hold TUNE or TUNE to advance quickly. nn nn ll Band Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands.
PAGE 7
XDM17BT OPERATION USB Operation Playing MP3 Files Track Select Fast Forward and Reverse Pause Folder Access Repeat To play MP3 files, insert a USB device containing MP3 files. Press TUNE Press TUNE track. ll nn to skip to the beginning of the next track. to skip to the beginning of the previous Press and hold TUNE reverse a track. Press Press ll or TUNE nn to fast forward or temporarily stop USB playback. ll// IIII toagain to resume playback.
PAGE 8
XDM17BT OPERATION Bluetooth Operation Preparation Pairing a New Device Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process. The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “Dual Media Player”. The Bluetooth passcode is "1234”.
PAGE 9
XDM17BT OPERATION Dual iPlug P2 Smart App Remote Control Use the Dual iPlug P2 Smart App Remote Control on an Apple or Android smartphone to control the receiver via Bluetooth. Change the mode, station, song, volume, and settings directly from your smartphone without being in the receiver's line-of-sight. Download the Dual iPlug P2 Smart App Remote Control from Apple App Store or Google Play Store and install it on your smartphone or tablet (QR code download link on the right).
PAGE 10
XDM17BT OPERATION Specifications FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: <42dBu Frequency response: 30Hz-2.2kHz General Speaker output impedance: 4~8 ohms Line output voltage: 2 Volts RMS Dimensions: 7" x 3.8" x 2" (178 x 97 x 50 mm) Design and specifications subject to change without notice.
PAGE 11
XDM17BT OPERATION Troubleshooting Problem Unit will not turn on (no power) Unit has power (but no sound) Cause Action Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Black wire not connected Fuse blown Speaker wires not connected Check connections for proper voltage (11~16VDC) One or more speaker wires touching each other or touching chassis ground Check connection to ground Replace fuse Check connections at speakers Insulate all bare speaker wires from eac
PAGE 12
XDM17BT OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
PAGE 13
XDM17BT OPERATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 14
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2019 Dual Electronics Corp. All rights reserved. Other trademarks and trade names are those of their respective owners.

Dual Electronics XDM17BT High Resolution LCD Single DIN Car Stereo Receiver with Built-In Bluetooth, USB, MP3 Player & Siri/Google Assist Button : User Manual (2024)

References