Open cell polyurethane acoustic cubes are a straight forward yet highly effective corner-specific solution that fulfil a crucial role in room acoustics to combat the build up of corner-based low-end energy • size 30 x 30 x 30cm • weight 810 grammes each • 26 pieces to sell.
EUR. 8,26 excl. VAT
Loudspeaker stands with adjustable top and bottom spikes providing flawless stability • extremely rigid structure of powder-coated steel • colour: black satin • cable managment inside main column • download the brochure
per pair
EUR. 57,02 excl. VAT
Loudspeaker stands with adjustable top and bottom spikes providing flawless stability • extremely rigid structure of powder-coated steel • colour: black satin • cable managment inside main column • download the brochure
per pair
EUR. 81,82 excl. VAT
Coaxial midwoofer + tweeter with vented reinforced plastic chassis and proprietary cone material with natural fibers • soft low damping rubber surround for improved transient response • optimized motor system and non-resonant long life lead wires • compact large surround dome tweeter • 2 new items to sell • download the datasheet
EUR. 36,36 excl. VAT
High quality black aluminum cone midwoofer • 8 ohms impedance • vented cast aluminum chassis; soft low damping rubber surround for improved transient response; non-conducting fibre glass voice coil former; extended copper sleeve on pole piece for low inductance and low distortion; CCAW voice coil for reduced moving mass; long life silver lead wires • 8 new items to sell • download the datasheet
EUR. 40,50 excl. VAT
One matched pair of Driade Model 91 loudspeakers in semi gloss black. Serial numbers 65a and 65b. Tweeters have been replaced, loudspeaker has been tested and is fully functioning. There are some minor imprefections in the paintwork but overall still in good condition considering the age.
EUR. 148,76 excl. VAT
DragonFly Cobalt flagship DAC, with a robust 2.1-volt output to drive almost any headphone, uses a bit-perfect digital volume control for outstanding signal-to-noise ratio, enables seamless compatibility with Apple and Android devices, and is an exceptionally competent and affordable MQA Renderer • absolute mint condition complete with original packaging • corresponding Dragontail USB-C and Dragontail Carbon Micro-USB adaptors also available.
EUR. 123,14 excl. VAT
72V DBS system • Solid Perfect Surface Copper+ conductors • FEP Air-Tube Dielectric • Carbon-Based 6-Layer Noise-Dissipation System • Triple-Balanced Geometry (separate ground-reference conductor) • Cold-welded, hanging-silver plating directly over high-purity red copper terminations • length 2x 100cm • still in very good condition complete with original packaging.
EUR. 577,69 excl. VAT
72V DBS system • Solid 10% Silver Conductors • Hard-Cell Foam Insulation • Carbon-Based 6-Layer Noise-Dissipation System • Silver-Plated Braid Shield • Cold-welded, hanging-silver plating directly over high-purity red copper terminations • length 1x 100cm • still in perfect condition complete with original packaging.
EUR. 371,90 excl. VAT
High quality foil-based audio grade resistors that offer great performance at a very affordable price point. Now with 50% discount! Available as 10 watts in many values from 1,5 ohms to 150 ohms. Colour grey • more information can be found here • hundreds to sell, available as long as stock lasts.
EUR. 0,54 excl. VAT
Aluminium horn for compression drivers with 1" inch exit • external dimensions 235mm x 189mm; entry dimension 1 inch; horn dispersion 60 x 50°; cut-off frequency 1000Hz; depth 172mm
Fiberglass horn for compression drivers with 2 inch exit • external dimensions 229mm x 319mm; mounting dimensions 195mm x 240mm; entry dimension 2.0 inch; horn dispersion 90°; cut-off frequency 700Hz; depth 120mm.
The SC-1096 is a bolt on horn with a 1 inch (25.4mm) throat diameter. It is a wide bandwidth constant directivity waveguide designed for use in very high performance designs • nominal coverage angle 90 x 60 degrees • cut-off frequency 800Hz • one brand new pair to sell • download the datasheet
EUR. 18,18 excl. VAT
The PH 2735 is a high impact glass filled ABS design and is fully braced to provide both excellent structural support for the driver and superior mechanical damping • external dimensions 350mm x 270mm; entry dimension 1 inch; horn dispersion 90 x 60°; cut-off frequency 500Hz; depth 200mm
90° x 90° Constant Directivity coverage with loading down to 500 Hz; thick aluminum body for best heat dissipation in conjuntion with neodimium compression drivers; perfectly controlled dispertion; weight 2,2 kg each • 2 new items to sell • download the datasheet
EUR. 55,- excl. VAT
USB Audio Interface • 48kHz converters, 2x RCA in/out, headphone connector 3.5 mm with adjustable volume, Optical S/PDIF output with direct conversion, Bus-powered, plug and play on Windows or Mac. In perfect working order, visually in good condition. Complete with original packaging and user manual.
EUR. 12,40 excl. VAT
Drum Metronome • Can be mounted on cymbal stand (holder included); 1/4-1/8-1/16 triplets individually adjustable; tempo adjustable from 30-250 BPM; tap function; input for mains adapter; stereo output for headphones; input for footswitch; can be used with battery (not included). In perfect working order, visually in good condition. Complete with mounting bracket, soft transport case (never used), original packaging and user manual.
EUR. 40,50 excl. VAT
Digital Chorus Ensemble • In perfect working order, visually in very good condition, especially considering the vintage. From the good old days, built to last - Made in Japan. Complete with original packaging and user manual!
EUR. 156,20 excl. VAT
Compressor Limiter • In perfect working order, visually in very good condition, especially considering the vintage. From the good old days, built to last - Made in Japan. Complete with original packaging and user manual!
EUR. 156,20 excl. VAT
paper cone midwoofer • fast, open and dynamic character • 16 ohms impedance; BL = 13N/A; Kapton voice-coil former; triple roll treated polycotton surround; neodynium ringmagnet •
2 new items to sell • download the datasheet
EUR. 81,82 excl. VAT
paper cone midwoofer • fast, open and dynamic character • 8 ohms impedance; BL = 11N/A; Glass Fiber voice-coil former; triple roll treated polycotton surround; neodynium ringmagnet • 2 items to sell • used for test purposes only; including original packaging • download the datasheet
EUR. 81,82 excl. VAT
The 10.50W is a high quality 10-inch midwoofer • 8 ohms impedance • one used item to sell • download the datasheet
EUR. 28,93 excl. VAT
15-inch midwoofer with low profile, carbon fiber reinforced, smooth curvilinear cone. The 100mm aluminum voice coil with Interleaved Sandwich Voice coil technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and energy • 8 ohms impedance
Fs = 48Hz • Qms = 4,64 • Qes = 0,3 • Qts = 0,32 • Mms = 17 grammes • Bl = 9,6 • Vas = 17 litres • Rdc = 6,2 ohms • Le = 0,60mH • Kapton voice coil former • one used pair to sell, still in very good condition
EUR. 20,66 excl. VAT